Panasonic Workio DP-1520P Operating Instructions Manual page 23

18 19
27 26 25 24
No. Icon
PAPER TRAY Key
17 Selects the paper tray.
Cursor Key
To select the zoom
19 ratio, etc.
Keypad
Sets copy quantities or
20
inputs the parameter(s) of
Function settings.
RESET Key
21
Resets all features to the
initial power-on state.
START Key
Starts the copy job.
23
CLEAR Key
Clears the copy count in
25
the display.
ACTIVE LED (GREEN)
27
Lights when machine is
active.
Sets scanning resolution.
29
(See page 60)
NOTE:
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep
pressing the ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE : Brighter
20
Contents No.
18
22
24
26
28
21 22
∗
Used for Fax, Internet Fax, and
Email Functions.
(except for the ABBR Key)
(See page 61)
23
Icon Contents
Warning Indications
When unit is used as a
photocopier.
: Add Paper (See page 14)
: Replace Toner Bottle
(See page 16)
: Removing misfed paper
(See pages 16-21)
: Call Service
(For DP-1520P)
STOP Key
Stops the copy run.
SET Key
Sets the parameter(s) of
Function settings.
FUNCTION Key
Use when changing the
paper size, initial function
values (default values) and
key operator settings.
ALARM LED (RED)
Lights/Flashes when
trouble occurs.
Lights:
Machine detected a trouble status
● No paper in the selected tray or toner
has run out.
● Machine detected trouble, such as
paper misfeed or jam.
Flashes:
Machine detected an alarm status
● No paper in the Tray. (Not selected tray).
● Toner is getting low, etc.
23