Selecting Or Repeating Tracks; Fast Forward And Backward Play; Repeat Track (Repeat); Intro - Silvercrest CRB-531 Instructions Manual

14.4 Selecting or repeating tracks

By briefly pressing the " " button , the playback jumps to the next track. If you press the " " button , the playback returns to
the beginning of the current track. If the " " button is pressed twice, the playback jumps back to the previous track.
You can briefly press both the " " and " " buttons until the number of the desired track appears in the display.

14.5 Fast forward and backward play

For fast forward play, press the " " button and keep it pressed until you have reached the desired point. Likewise, press the
" " button for fast backward play and keep it pressed until you have reached the desired point. To control the process, the
increasing or decreasing minute and second amount is indicated on the display.

14.6 Repeat track (repeat)

To repeat a track, briefly press the button "2" . The abbreviation "RPT" will briefly appear on the display and the current title
will be repeated continuously.
To end this function, press the button "2" again. The abbreviation "RPT" will be turned off and the playback of the tracks will
continue normally.

14.7 Intro

To briefly scan the tracks, briefly press the station button "3" during the playback. Then all tracks will be scanned for approx.
ten seconds. The abbreviation "INT" will appear on the display.
To end the INTRO function, briefly press the station button "3" again. The scan function will end and the "INT" message is
turned off on the display.
The playback continues at the point where the last intro was broken off.
27