Regional Programmes ("Reg"); Cd Mode; Selecting A Cd As A Program Source - Silvercrest CRB-531 Instructions Manual

13.7 Regional programmes ("REG")

Some radio stations divide their programs into regional stations with different content at specific times. If the reception is getting
worse, the "REG" function prevents the car radio from changing to alternative frequencies that have different program contents.
To turn the "REG" function on or off, please keep the "AF/REG" button
display.

14 CD Mode

The SilverCrest CRB-531 Bluetooth car radio supports the formats CD-Audio; CD-R; CD-RW and MP3/WMA/OGG-CD. The bit
rate has to be between 64kbps and 320kbps.
Note:
Conditional on the quality differences of the media as well the characteristics of the recording, it can happen that some
individually recorded CDs are unable to be read. Such events do not constitute a malfunction of the device.
Audio CDs (CD-R and CD-RW) that are recorded individually have to be finalized at the end of the burning process.
Note that the file names of the audio tracks have to correspond to the ISO-9660 standard. During the playback of MP3-
CDs, individual tracks can be skipped or not played back correctly. This can be due to the respective disc configuration,
the decoder software, or the hardware that was used for the recording.
Copy-protected CDs do not correspond to the specifications of audio CDs (CD-DA), don't carry the respective logo, and
can therefore cause playback errors.

14.1 Selecting a CD as a program source

To play a CD, turn on the device with the "PWR/MUTE" button
playback begins at the track heard before turning off the device. If the device is set to another program source, press the
"MODE" button until you get to the CD function. The display will indicate the message "TOC READ".
Note:
The program source "CD" can only be selected through the "MODE" button
pressed until "REG-ON" or "REG-OFF" appears in the
. If the device was turned off during CD operation, the
if there is a CD in the CD slot.
25