Remote Code - Panasonic KX-TS620EX Operating Instructions Manual

Remote Code

The remote code prevents unauthorised people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99).
Your phone default remote code is "11". If you do not program your own remote
code, you can use "11".
Make sure that the handset is on the cradle, the AC adaptor is connected and
the Speakerphone/headset {s/W} indicator light is off.
?
} {
1
Press
2
Scroll to "TAD program ?" by pressing
} or { } and press { OK } (Yes key).
4 3
{
3
Scroll to "Remote code ?" by pressing
} or { } and press { OK } (Yes key).
{ 4 3
4
Enter a new code using a 2-digit number.
(Example: "23" is entered.)
5
Press { OK } (Save key).
• A long beep sounds.
• The display will return to step 3. To exit the
programming mode, press
wait for 60 seconds.
• You can exit the programming mode any time by pressing
To check the remote code
Repeat steps 1 to 3.
• The current remote code is displayed. When finished, press
.
{ ? }
or
Answering System
Remote code
: 23
[OK]=Save
{ ? }
.
{ ? }
.
49