Remote Operation; Remote Access Code - Panasonic KX-PRW120AZ Operating Instructions Manual

Answering System
Turning on/off the new message alert
setting
1
MMenuN (right soft key) #338
2
MbN: "On/Off" a MOKN
3
MbN: Select the desired setting. a MOKN
a M N
Editing the set phone number
1
MMenuN (right soft key) #338
2
MbN: "Notification to" a MOKN
3
MMenuN a MbN: "Edit" a MOKN
4
Edit the name if necessary (16 characters
max.). a MOKN
5
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a M
Erasing the set phone number
1
MMenuN (right soft key) #338
2
MbN: "Notification to" a MOKN
3
MMenuN a MbN: "Erase" a MOKN
4
MbN: "Yes" a MOKN a M
R The new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 40) to play the
new message from the new message alert
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code (page 40) and then press 4
to play new message.
1
MMenuN (right soft key) #338
2
MbN: "Remote Code" a MOKN
40
PRW120AZ(en)_0724_ver012.pdf
3
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
n When the remote access code is set to
Note:
N
R Within 10 seconds after listening to new
R Even if the unit makes a new message alert
N

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.

Remote access code

A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Important:
R In order to operate the answering system
1
40
MbN: "Activate" or "Inactivate" a
MOKN a M N
"Inactivate":
Press 4 to play the new message during
the announcement.
"Activate":
1
Enter the remote access code
(page 40) during the announcement.
2
Press 4 to play the new message.
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
call, the handset redial list does not show
the record.
remotely, you must first set a remote
access code.
MMenuN (right soft key) #306
2013/07/24 14:17:29