Useful Information
Troubleshooting
Problem
The unit does not work. • Check the settings (p. 9–15).
The unit does not ring.
You cannot dial.
The other party
suddenly cannot hear
your voice during a
conversation.
You cannot program
items such as the
dialling mode.
You cannot store a
name and phone
number in memory.
While programming or
searching, the unit
starts to ring and stops
the program/search.
56
• Unplug the AC adaptor to reset. Plug in, and try again.
• KX-TS620EXW or KX-TS620EXB is not designed to
be used with rotary (pulse dialling) services.
The ringer volume is set to OFF and "
•
Select the ringer volume to HIGH, MID or LOW by
pressing
{a/b}
• Dial lock mode is set. To cancel the mode,
see page 42.
• The dialled number is restricted. To cancel,
see page 43.
may have been pressed during the conversation.
• {T}
If "
" is displayed, press
Programming is not possible when the handset is off
•
the cradle, the Speakerphone/headset
lights, or when viewing caller information.
• Do not pause for over 60 seconds while programming.
Programming is not possible when the handset is off
•
the cradle or the Speakerphone/headset
indicator lights.
• Check the AC adaptor is connected to the unit.
• Do not pause for over 60 seconds while storing.
• Do not enter a phone number more than 32 digits long.
• When using the Dial Lock (p. 42) or Call Restriction
feature (p. 43), you cannot store a phone number in
the Direct Dial memory ({ M1 }, { M2 } or { M3 }) and
emergency numbers (#).
• If "Phonebook full" is displayed, erase other stored
items from the Phonebook memory (p. 35).
To answer the call, lift the handset or press
•
Start again from the beginning after hanging up.
Cause and Remedy
(p. 15).
.
{T}
~
" is displayed.
indicator
{s/W}
{s/W}
.
{s/W}