Erasing Messages - Panasonic KX-TS620EX Operating Instructions Manual

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
3 minutes. New messages cannot be recorded when:
— "Memory full" is heard.
— "Message full" is displayed.
— The MESSAGE indicator flashes rapidly (only when the Answering System is ON).
Erase some, or all, of the messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press { } while the message you want to erase is being played.
• The unit erases the message.
• A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
1
Press { }.
• "To erase all messages press ERASE
again" is heard.
2
Within 10 seconds, press { }
again.
• A long beep sounds and "No message"
is heard. The display shows
" message
• The information in the Caller List will not be erased. To erase Caller List information, see
page 30.
".
Answering System
MESSAGE Indicator
{ }
47