2. REPLACEMENT PARTS LIST Ref. No. Part No. Part Name & Description Pcs/Set Remarks PQJA10075Z Telephone Line Cord (2 Wire) PQJA10088Z Telephone Line Cord (4 Wire) PQJA10126X Handset Cord PQJXE0401Z Handset KX-TCA1-G AC Adaptor PQQX13266Z Instruction Book (English) PQQX13267Z Instruction Book (French)
Page 4
3. CONNECTION 3.1. Connecting the Handset/AC Adaptor - USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX- TCA1-G). - Use only a Panasonic Handset for the KX-TSC14CB. - The AC adaptor must remain connected at all times. (It is normal for...
Page 5
the adaptor to feel warm during use.) - During a power failure the unit will work as a standard telephone on the Line 1, but the following features will not work. -Call Display services -speakerphone -line indicators -LCD display 3.2. Connecting the Telephone Line Cord Connect the telephone line cord(s) to the unit as follows.
Page 6
3.2.3. If you use the unit only as a single-line telephone - For this connection, you can only use LINE 1. 3.3. Connecting a Communication Device After connecting the telephone line cord to a two-line telephone jack, you can connect a...
communication device (computer, modem, fax, answering machine, etc.) through this unit using the LINE 2/DATA jack (—Data Port). - If the LINE 2/DATA indicator lights, the communication device is in use. Use LINE 1 to make a call. Otherwise the communication device may not operate properly.
development of new technology. 8. The shades area on this schematic diagram incorporates special features important for protection from fire and electrical shock hazards. 9. When servicing, it is essential that only manufacture’s specified parts be used for the critical components in the shaded areas of the schematic.
Page 9
-2dBm -30dBm/600 IC903 IC902 KX-TSC14CB SCHEMATIC DIAGRAM LCD P. C. Board...