Direct Remote Operation - Panasonic KX-TS620EX Operating Instructions Manual

Answering System

Direct Remote Operation

Once you have entered the remote code, you can also control your unit by direct
commands instead of using the voice menu. To end the remote operation, hang up
anytime.
Direct commands
NEW MESSAGE
PLAYBACK
ALL MESSAGES
PLAYBACK
REPEAT
(During playback)
SKIP
(During playback)
STOP
(During playback)
GREETING MESSAGE
RECORDING
ERASING A SPECIFIC
MESSAGE
(During playback)
ERASING ALL
MESSAGES
ANSWERING SYSTEM
OFF
52
• Only new messages are played back.
{4}
• All messages are played back.
{5}
• The current message is repeated.
{1}
• The current message is skipped.
{2}
The next message is played.
• Operation is stopped temporarily.
• To resume operation, enter a direct
{9}
command within 15 seconds, or the voice
menu will start (p. 50).
• A long beep sounds.
{7}
• After the beep, talk immediately for up to
RECORD
1 minute.
• The recording is stopped.
{9}
• The recorded message is played.
• The current message is erased.
• A short beep will sound and the next
{£} {4}
message will be played.
• All recorded messages are erased.
{£} {5} • A long beep sounds and "No message" is
heard.
• When you press {0}, "Answer off. Thank you
{0} for your call" is heard, the unit hangs up and
will not answer calls until turned on again.