Erasing Messages - Panasonic KX-TG2583S Operating Instructions Manual

Erasing Messages
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
--"Memory
flllI" is heard.
--"Message fuZl" flashes on the base unit display.
--the ANSWER QN indicator flashes rapidly.
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press [ERASE/CLEAR] while the message you want to erase is being
played.
,,The unit erases the message.
•A short beep witl sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
1
2
Press [ERASE/CLEAR_.
• P ess ERASE ag_ to eJase all
i _essages iS heard.
Within 5 seconds, press
[ERASE/CLEAR] again.
eA beep sounds and "No me,,,,ages" is
heard.
•,The base unit display shows
"0
message".
t IS
_l o _"%;17
ANSWER ON [ERASE/CLEAR ]
Indicator
,,,The information in the Caller List will not be erased. To erase Caller List
information, see page 39.
59