Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than
5 minutes. New messages cannot be recorded when:
— "Memory full" is heard.
— "
" is displayed on the base unit.
MESSAGE FULL
— ANSWER ON indicator flashes rapidly (only when the Answering System is on).
Erase unnecessary messages. We recommend you erase unnecessary messages
after each playback.
Erasing a specific message
Base Unit
Press [ERASE] while the message you want to erase is being played.
• A beep will sound and the unit will continue to play the next message.
• To end playback, press [STOP] 2 times.
Handset
Press [ ][4] while the message you want to erase is being played.
• A beep will sound and the unit will continue to play the next message.
• To end remote operation, press [OFF].
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
Base Unit
1
Press [ERASE] while the base unit is not
being used.
• "To erase all messages, press ERASE again" is heard.
2
Within 10 seconds, press [ERASE] again.
• A long beep will sound and "No messages" will be
heard.
Handset
1. Press the soft key (
2. Press [ ][5] to erase all messages.
• A long beep will sound and "No messages" will be heard.
• To end remote operation, press [OFF].
For assistance, please call: 1-800-ADT-ASAP
) .
PLAY
Press ERASE
to erase all
messages
All erase
IN USE
MESSAGES
59