Storing Caller List
Information in the Direct
Dial Memory
You can store numbers in the Caller List
to the Direct Dial memory ({M1}, {M2}
and {M3}).
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {
} or {
4
Caller List.
2
Scroll to the caller you want to
store in the Direct Dial memory
by pressing {
3
Press {FUNCTION/EDIT}.
• If the number requires editing, see
page 27.
123456789
4
Press {OK} (Next key).
a) If a name is not required,
press {OK} (Next key).
b) If a name is required, enter the
name (p. 32). When finished,
press {OK} (Next key).
Enter name
JACK SMITH
>Save phonebook
Save M1,M2,M3
} to enter the
3
} or {
4
3
}.
[OK]=Next
[OK]= Next
[OK]=Save
5
Press {
4
}.
Save phonebook
>Save M1,M2,M3
6
Press one of the Direct Dial
button ({M1}, {M2} or {M3})
(Save key).
(Example: {M1} is pressed.)
If the Direct Dial button
selected is occupied, the
display will be shown as
below.
M1 is occupied
Overwrite ?
[
To overwrite, press {OK}
(Yes key).
To select the other empty Direct
Dial memory, press {
and press an empty Direct Dial
button ({M1}, {M2} or {M3}).
• A long beep sounds.
• The display will return to Caller List.
You can continue storing other
items. To exit the programming
mode, press {EXIT} or wait for 60
seconds.
• To erase other stored items from the
Direct Dial memory see page 37.
• To cancel during programming, press
{EXIT}. Start again from step 1.
• You cannot store caller information in the
Direct Dial memory if a phone number is
not displayed.
Caller ID Service
M1,M2,M3=Save
]=No
[OK]=Yes
} (No key)
3
29