Direct Dial (M1, M2, M3); Storing Names And Numbers In The Direct Dial Memory - Panasonic KX-TS620FX Operating Instructions Manual

Direct Dial (M1, M2, M3)

Storing Names and
Numbers in the Direct Dial
Memory
You can store up to 3 names and phone
numbers in the memory.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
Scroll to "Save M1,M2,M3 ?"
2
by pressing {
press {OK} (Yes key).
3
Enter a name, up to 15
characters with the dialling
buttons {0} to {9}, {£} and {#}
(p. 32).
• To move the cursor, press {
9
{ }.
• If a name is not required, go to
step 4.
4
Press {OK} (Next key).
5
Enter a phone number up to
32 digits.
• If you enter a wrong number, press
{ERASE} and enter the correct
number.
• To erase all of the digits, press and
hold {ERASE}.
• If you want to change the storing
name, press {
desired display.
123456789

36
} or { } and
4 3
:
} or
3
} to reach the
M1,M2,M3=Save
6
Press one of the Direct Dial
button ({M1}, {M2} or {M3})
(Save key).
(Example: {M1} is pressed.)
• A long beep sounds.
• The entered name and phone
number are displayed.
• After a few seconds, the display will
return to step 2. To exit the
programming mode, press {EXIT}
or wait for 60 seconds.
• When using the Dial Lock (p. 42) or
Call Restriction feature (p. 43), you
cannot store a phone number in the
Direct Dial memory ({M1}, {M2} or
{M3}).
If the Direct Dial button
selected manually is occupied,
the display will be shown as
below.
To overwrite, press {OK}
(Yes key).
M1 is occupied
Overwrite ?

[
To select the other empty Direct
Dial memory, press {
and press an empty Direct Dial
button ({M1}, {M2} or {M3}).
• A long beep sounds.
• The display will return to step 2. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
• To continue storing other items,
repeat from step 2.
]=No [OK]=Yes
} (No key)
3