Display Language - Panasonic KX-TS620FX Operating Instructions Manual

10
Press {OK} (Save key).
• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
• You can go back to the previous screen by
3
pressing { }, when setting the time and
date (steps 3 through 9).
• If 3 beeps sound when entering the time
and date, the time and date entered are
not correct. Enter the correct time and
date.
After recover from power failure, "
flash. Readjust the time and date
For Caller ID service users (p. 24)
If a time display service is available with
the Caller ID service:
The Caller ID information will re-set the
clock after the ring if the adjusted time
and/or date is incorrect and the Time
Adjustment set to ON (p. 15). If the time/
date has not previously been set, the
Caller ID information will not adjust the
.
clock

Display Language

You can select "English", "Romanian",
"Polish", "Czech" or "Hungarian" as the
display language.
Your phone default setting is "English".
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
" will
2
.
3
4
5
• You can exit the programming mode any
time by pressing {EXIT}.
Press {FUNCTION/EDIT}.
Scroll to "Change language?"
by pressing { 4 } or {
Press {OK} (Yes key).
Select "English", "Româna",
"Polski", "Cestina" or
"Magyar" by pressing {
3
{ }.
Language
: English
43
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 2. To
exit the programming mode, press
{EXIT} or wait for 60 seconds.
Settings
3
}.
} or
4
[OK]=Save
13