Using the Caller List
Storing Caller Information in the Phone Book
Base Unit Handset
Callers' names and phone numbers that are in the base unit or cordless handset
Caller List can be stored in each unit's phone book.
1
Scroll to the desired caller by pressing [ ] or
[ ].
• If the number requires editing, see page 36.
2
Press [ ].
• To stop storing, press [ ].
3
Press [ ] again.
• If there is no name information for the caller, "Enter name" will be
displayed.
— You can enter a name by performing the following steps:
(1) enter the name (p. 41),
(2) press [ ], and
(3) press [ ] (Save) on the base unit or press the soft key (
the cordless handset.
— If a name is not required, press
unit or press the soft key (
• To continue storing other items, repeat from step 1.
• To exit the programming mode, press [STOP] on the base unit. For the
cordless handset, press [OFF].
• You cannot store Caller List items in the phone book if a phone number is not
displayed.
38
[ ]
, then press [ ] (Save) on the base
) on the cordless handset.
SAVE
TURNER,CINDY
1-555-456-7890
11:20A JAN.12 ×3
Save phone book?
=No
=Yes
) on
SAVE