Storing Caller List Information In The Directory - Panasonic KX-TG2583S Operating Instructions Manual

Using the Caller List
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory. Storing must be carried out with the handset.
Make sure the unit is in the standby mode initially.
Press [_ or [_) to enter the Caller List.
2
Press @_or (_ repeatedly to find the
caller you want tO store in the directory,
and press FWD/EDIT (_ (Yes key).
•ff the number requtres editing, see page 36.
Press (_ or _ to select "Save
direcLory", and press FWD/EDIT (_
(Yes key).
¥_0 new calls
_=Directory
CTNDY TURNER X3
1-234 456 7890
II:20A JAN,12
_Edit directory
T_ ave _=Yes]
Edit directory ]
,Save
YA _:Yes]
I °
Enter name
_' ¥:Next
[ °
ENter _ame
CINDY TURNER
_ ¥:Next
CINDY TURNER
12344567890
If there is no name information for the
caller, "Enter name" will be displayed.
a) If a name is not required, press
(Next key) and press FWD/EDIT [_
(Save key).
b) If a name is required, enter the name
(p 45). When finished, press (_
(Next key) and press FWD/EDIT [_
(Save key).
• A beep sounds.
,,To continue storing other items, repeat from
step 2.
,,To return to the standby mode, press
FUNCTION/EXIT/OH J.
•You can exit the programming mode any time by pressing [FUNCTION/EXlT/CH].
,,If the display shows "I); recLory full" in step 3, press IFUNOTION/EXIT/CH]
to exit the list To erase other stored items from the directory, see page 51.
• After the maximum of 50 items has been stored. 'Di_. e<". ory [J 11" is atso displayed.
,,You cannot store caller information in the directory if a phone number is not
displayed
• If 3 beeps sound and the display shows "s._, ,_r __ . move closer to the base
unit and start again from step 1.
38