Table of Contents
Advertisement
1.5.1.8. BAUD RATE
Used to select the transmission speed of RS-232 in accordance with an external controller
setting. The initial setting is 19200 (19,200bps). You can select 9,600bps or 19,200bps.
[Procedure]
1.
Select BAUD RATE in MISC FUNCTION in the system menu.
2.
Set 9600 or 19200.
1.5.1.9. SYSTEM SYNC
Used to set a vertical synchronizing frequency in accordance with a moving pictures signal to be
mainly displayed. The initial setting is 60 (60Hz). Set 60Hz for NTSC signal or 50Hz for PAL
signal. All cubes in a display wall should be the same setting.
[Procedure]
1.
Select SYSTEM SYNC in MISC FUNCTION in the system menu.
2.
Set 60 or 50.
1.5.1.10. IMAGE FLIP
This adjustment is normally unnecessary.
Used to invert the displayed image vertically or horizontally.
normal image.
•
S/W: Normal image
•
S/E: Vertically flipped image
•
N/W: Horizontally flipped image
•
N/E: Vertically/horizontally flipped image
[Procedure]
1.
Select IMAGE FLIP in MISC FUNCTION in the system menu.
2.
Set S/W, S/E, N/W or N/E.
R
e
a
R
e
a
41
r
should be set S/W for the
r
REV 2.5
Advertisement
Table of Contents
