Table of Contents
Advertisement
3.3. Test pattern list
Pressing [TEST] button rounds the test patterns to be displayed in the following order.
Full-bit white – Crosshatch – Adjustment white – Gradation – Color bar – Test pattern OFF – (Full-bit
white)
Pattern
Any picture adjustments except gamma compensation are
invalid.
Full-bit white
All RGB-GAIN values in BLACK LEVEL become 0 at full
black. [R], [G] and [B] buttons can turn ON/OFF each color.
Crosshatch
[R], [G] and [B] buttons can turn ON/OFF each color.
Adjustment white
[R], [G] and [B] buttons can turn ON/OFF each color.
Gradation
All picture adjustments are invalid.
Color bar
3.4. Control panel
RGB input board (optional)
Video input board (optional)
3.5. LED display
This product indicates current status on the error indicator in the control panel
and with "Warning LED" which lights blue on the screen.
•
Warning LED indication can be set in INDICATION menu (chapter 1.5.1.11,
on page 42). You can erase the indication by [ESC] button while LED
lighting. [DISPLAY] button can restore the setting. This LED off setting is
effective until the main power switch is turned off.
•
A lamp operating time is shown on the error indicator with 5-digit blinking
figure by pressing [DISPLAY] button while power on or stand-by state.
Description
93
Case of use
Total adjusting for display wall
CSC adjustment
GRADATION adjustment
CSC adjustment
Warning LED
(Blue light on screen)
REV 2.5
Advertisement
Table of Contents
