Table of Contents
Advertisement
3.
Pull up the bottom of the screen unit to rotate 90
degrees with pushing flip-up lock levers located inside
the screen unit in both sides.
6
7
"
: The levers can be unlocked
6
7
"
respectively.
Be careful not to push the
adjacent screen-detaching lever.
1.2.7.2. Screen closing
Be careful not to trap your fingers during the work.
1.
Push down the bottom of the screen slowly till locked.
2.
Press down the slide lock levers in both sides to unlock,
and push the screen unit along the rail till the end.
6
7
"
: The levers can be
6
7
"
unlocked respectively.
Note:
Depending
on
adjustment (chapter 1.2.6.5, on page
21), the screen unit may touch the top
edge of the lower screen. In this case,
slightly lift the upper screen to close
without touching.
PH50, XL50, XL21 series Set-up and Installation Manual
(Screen-detaching lever)
Slide lock lever (inside the arm)
the
screen
gap
Push
Flip-up lock lever (inside the screen unit)
24
Advertisement
Table of Contents
