Midas HERITAGE 1000 Operator's Manual page 28

The LAMP BRIGHTNESS control is a
dimmer for the console littlites.
The LED BRIGHTNESS control is a
dimmer for the console surface LEDs.
left center right
mono
+21 +21 +21
+18 +18 +18
+15 +15 +15
+12 +12 +12
+9 +9 +9
+6 +6 +6
+3 +3 +3
0 0 0
-3 -3 -3
-6 -6 -6
-9 -9 -9
-12 -12 -12
-15 -15 -15
-18 -18 -18
-21 -21 -21
-24 -24 -24
-27 -27 -27
-30 -30 -30
-33 -33 -33
-36 -36 -36
bus bus bus
peak peak peak
master
right
left pfl
+21 +21 +21
+18 +18 +18
+15 +15 +15
+12 +12 +12
+9 +9 +9
+6 +6 +6
+3 +3 +3
0 0 0
-3 -3 -3
-6 -6 -6
-9 -9 -9
-12 -12 -12
-15 -15 -15
-18 -18 -18
-21 -21 -21
-24 -24 -24
-27 -27 -27
-30 -30 -30
-33 -33 -33
-36 -36 -36
bus bus bus
peak peak peak
monitor
lamp dim
tape input
0
0
-
+
+10
led dim
0
to
MONO
to
ST
- +
18
The MASTER METERS monitor the
peak signal level of the master post
fader left, center and right outputs.
The BUS PEAK LED's indicate that
signals are near clipping on the master
busses (pre insert signals).
The MONITOR METERS monitor the
peak signal level of the local monitor
pre fader outputs.
The BUS PEAK LED's indicate that
signals are near clipping on the solo
busses.
The tape inputs provides a feed from
an unbalanced phono source to the
stereo and or mono master busses. The
TAPE LEVEL control provides
nominal adjustment from +10 to off.
The tape to MONO switch connects
the tape inputs to the mono master bus.
The tape to ST switch connects the
tape inputs to the stereo master busses.