Midas HERITAGE 1000 Operator's Manual page 38

Operating the STORE key will store
the current console assignments and
settings to the snap shot being
displayed on the numeric display.
automation system
store midi
insert delete
check cancel
act
act/scene
down
c/o
last now
headphones
MIDAS
The COPY, DELETE and INSERT keys allow the operator to edit
the snapshot sequence in the following manner:-
system
copy
confirm
scene
up
next
HS1031
The MIDI key allows the operator to edit the snap shot
MIDI information. On entering this mode the operator
will be presented with a menu of the four MIDI
messages that are stored within each snap shot, its
operation is similar to the system menu.
INSERT. Pressing this key will allow the operator to insert a
snapshot at the number on the numeric display. The scene that
was originally at the number and all con-current scenes will be
re-numbered by adding one to their scene numbers.
COPY. This will copy the snapshot currently displayed on the
numeric display to a temporary memory location. This can then
be stored or inserted to a new scene number in the normal
fashion. When in copy mode a fast scene number can also be
assigned to the scene by simply pressing the desired fast scene
switch.
DELETE will erase the snapshot that is currently being
displayed on the numeric display from the automation memory.
The CHECK switch provides a preview of any snapshot on the
console surface WITHOUT recalling the ACTUAL setting to the
console surface (mutes are displayed on the safe switches so that
current mute status is always present and accurate). Whist in
check mode the ACT/ SCENE C/O, and UP/DOWN switches
can be used to step through the snapshots.
28