Midas HERITAGE 1000 Operator's Manual page 24

The TALK switch connect the master
module talkback systems to the
individual aux send busses. The master
module can route it's oscillator, pink
noise, external input or talk mic.
The master STEREO AUX switch on
groups 8 and 10 change the
appropriate input module aux sends to
be used as stereo level and pan pairs.
The aux LEVEL control gives
continuos adjustment of output levels
from +10dB to off.
The FADER SWAP switch swaps the
group output faders and aux master
rotary controls along with their solo
and mute switches. Connections for
inserts and XLR outputs are
unaffected.
+21
+18
+15
+12
+9
+6
+3
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
-36
bus
peak
meter
10
aux
auxiliary
master
select
TALK
O
reverse
stereo
aux
aux
MUTE
group
SAFE
0
+10
level
SOLO
fader
10
swap
14
The METER monitors the peak signal
level of the post fader sub group
outputs and the BUS PEAK LED
indicates that signals are near clipping
on the sub group bus (pre insert
signals).
The METER TO AUX switch moves
the meter and peak LED to monitor
aux signals in place of the sub group
signals.
The PHASE switch activates a 180
degrees phase change within the post
fader aux signal path. This will effect
the post fader feeds to the matrix as
well as the main aux outputs.
The MUTE switch mutes the aux post
level control signals. The switch can be
controlled from snapshot automation.
The SAFE switch removes the aux
mute from snapshot automation
control.
The SOLO switch sends the aux signal
to the PFL mono and AFL stereo
busses. If the switch is pressed for a
short time it will latch on or off, but, if
it is held on for more than 1 second the
latching is disabled and when the
switch is released the channel solo will
turn off. As a default the solo system is
auto cancelling so each new solo
cancels the last. The SOLO ADD mode
switch on the master module defeats
the auto cancelling and allows multiple
channel monitoring. In this mode input
solos have priority over outputs and
will temporarily override any active
output solos.