Midas HERITAGE 1000 Operator's Manual page 39

VCA MASTER FADER AUTOMATION.
The fader automation operates in two main ways:-
REAL FADER MODE and VIRTUAL FADER MODE.
In REAL FADER MODE all of the internal VCA systems are controlled
by the real (physical) faders. The automation system can assist in the
control of the real faders by prompting the operator using the 11 LED's
next to each fader.
If the console is un-locked to RECALL level or higher the operator can
view the fader positions required for a given snapshot by simply
recalling the scene. The LED's will flash to display the approximate
position that the fader should be set to and they will extinguish when the
fader has been moved to the correct position. When the faders are close
to the correct position the LED's will change to give "up" "down"
indication either side of the required fader positions.
If the console is un-locked to STORE level or higher operator can recall
scenes as above and can also store and overstore. When a store is made
the fader position stored will always be the actual current position of the
real fader.
In VIRTUAL FADER MODE the console automation takes control of all
internal VCA systems and displays a representation of the virtual fader
position using the 11 LED's next to each fader. Additional adjustment
trims can be added if required using the real faders. The virtual fader
system works in distinctly different ways depending on the lock status:-
If the console is un-locked to RECALL level or higher scenes can be
recalled but not stored or overstored. If fader adjustments are required
they are started by fader "pick up" at the "0dB position". Fader
adjustments then remain active for all subsequent scenes recalled (unless
the adjustment is "cleared").
If the console is un-locked to STORE level or higher scenes can be
stored, recalled and overstored. When a store is made the fader position
stored will always be the virtual fader position regardless of the real
fader. If fader adjustments are required they are started by fader "pick
up" at the current virtual fader position. As soon as a new scene is
recalled by the automation the fader adjustment is removed forcing the
operator to "pick up" again before making further adjustments.
29
vca
MUTE
auto
disable
SAFE
10
5
0
5
10
15
20
25
30
40
50
group
MIDAS HS1012