Midas HERITAGE 1000 Operator's Manual page 36

The SOLO IN PLACE switch sets the console to solo in place
mode. In this mode any input solo that is pressed activates a mute
of all the other channels. To protect against accidental operation
the solo in place switch must be pressed for 3 seconds before it
will operate. The mute safe switches on the input channels can be
used to protect channels from this function if desired.
The VIRTUAL FADER switch enables
the operation of the virtual fader
system. The virtual fader system can
only be active if the console is
unlocked (including the assignment
lock) to RECALL, STORE or higher.
To protect against accidental operation
the virtual fader switch must also be
pressed for 3 seconds before it will
operate.
solo in place
(hold 3 seconds)
automutes
1
2
3
4
5
6
7
8
9
10
virtual (hold 3
fast
fader seconds)
scenes
26
The FAST SCENE keys are an alternate
function of the automute master switches
and provide the operator with ten quick
entry points within an ACT/SCENE
sequence. i.e. If FAST SCENE key one is
associated with ACT.SCENE 10.02,
pressing it will recall ACT.SCENE 10.02.
Fast scenes are generated by using the
COPY switch as described later.
The FAST SCENE switch changes the
operation of the 10 keys above to operate
as fast scenes in place of automute masters.
This function has a time out which operates
after 3 seconds and returns the keys to
automute operation.