Snapshot Automation System - Midas HERITAGE 3000 Operator's Manual

Snapshots can be stored in the automation system as ACTs or SCENEs. There is no difference between
an ACT or a SCENE apart from the numbering; scenes are just sub sets within acts.
The AUTO MUTE GROUP MASTER switches (1 to 10) activate
the mute circuits on any, mute group assigned, input channels.
a
1
u
2
t 3
o
4
5
m
6
u
7
8
t
e
9
s
10
LAST recalls the snap shot numerically
preceding the snap shot that is currently
recalled/stored.
NOW recalls the snap shot that is currently indicated on
the numeric display.
34

Snapshot Automation System

automation
system
f
store
a
insert
s
t
check
s
c
e
act
act/scene
c/o
n
e
last
s
The FAST SCENE keys provide the
operator with ten quick entry points within
the ACT/SCENE sequence. i.e. If FAST
SCENE key one is associated with
ACT.SCENE 10.02, pressing it will
system
midi
recall ACT.SCENE 10.02. Fast scenes are
generated by using the COPY switch as
described on the next page.
delete copy
cancel confirm
The ACT/SCENE C/O switch is used to
select the acts or scenes in conjunction
scene
with the UP/DOWN switches. An
down up
appropriate indication, "ACT" or
"SCENE", will be illuminated to indicate
this status.
now next
MIDAS
The LAST, NOW and NEXT switches
recall snapshots to the console surface.
NEXT recalls the snapshot numerically
proceeding the snapshot that is currently
recalled/stored.
If dot is lit the scene number
displayed is the scene currently
recalled.
If dot is lit the scene number
displayed has scene information
stored in it.
The UP/DOWN switches allow the
operator to scroll through act/scene
numbers and navigate through menus.