Midas HERITAGE 3000 Operator's Manual page 35

The matrix STEREO switches select the
source for the lower matrix mix controls
as either left channel, right channel or a
sum of both.
The PRE fader switches change the
signals sent to the matrix mixes from post
group fader to pre group fader.
The MONO level control gives
continuous adjustment of the mono master
output level from +10dB to off.
The mono TALK switch connect the
mono master to the MONITOR module.
When the TALK INTERNAL or
GENERATOR INTERNAL are active on
the MONITOR module the oscillator,
pink noise and talk mic can be routed to
the mono master outputs.
The mono INST switch connects the
mono insert return signals to the mono
master signals.
1
0
left
sum
right
+6
2
0
left
sum
right
+6
3
0
left
sum
right
+6
4
0
left
sum
right
+6
5
0
left
sum
right
+6
6
0
left
sum
right
+6
7
0
left
sum
right
+6
8
0
left
sum
right
+6
mono
PRE PRE
fader insert
0
+10
mono (centre)
TALK
INST
mute
balance
SAFE
The matrix MIX controls (1 to 8) give
continuous adjustment of the master
levels sent to the matrix mixes from
+ 6dB to off. The top control adjusts the
feed from the mono master and the lower
control adjusts the feed from the stereo
masters.
The PRE insert switches change the
signals sent to the matrix mixes from post
group insert to pre group insert and
override the pre fader switches. It is
important to note that pre insert matrix
sends are also pre the master mutes.
The MUTE switch mutes the mono
master signals at all points after the
insert send. The switch can be controlled
from snapshot automation.
The mono mute SAFE removes the mono
mute from snapshot automation.
23