System Connection - Midas XL42 Operator's Manual

The XL42 is a versatile expansion to any system, or a complete system on its own.
You can use it:
As a replacement for an inferior mic pre-amp
!
Plug the microphone or DI box into the XL42 and the output into the line input of your console. You can also
use the XL42 EQ and bypass your console's EQ. Set PAN to off for mono operation or on for stereo operation.
As a better EQ section for your console.
!
Plug the XL42 into the insert point of your console (Desk Send to XL42 Input and XL42 Output to Desk Return).
Set the PAD switch on the XL42 to the in position in for a line level signal.
As an expansion to your console.
!
Connect your XL42s in a
( or two mono channels)
As a high quality pre-amp and EQ
!
Plug your microphones, such as a stereo condenser pair for recording, into the XL42 and the outputs into a
DAT, CD or hard disk recorder.
The XL42 is the perfect companion for any system and could even be used for computer audio or drum sub-mixing
where a high quality pre-amp and EQ is required.
.
daisy chain configuration. Connect
on your console or into a stereo/effects return.
.
XL42 Operators Manual - Page 13

System Connection

System Connection
outputs from the last XL42 into a stereo channel