Administrator Management Screens; To Display The Administrator Management Screens - Konica Minolta Di2510 User Manual

6
6.1

Administrator Management Screens

To display the Administrator Management screens

This explains the method for displaying the Administrator Management screens.
1
Press the [Utility] key.
2
Touch [Admin. Management].
Note
The functions on the Adminis-
trator Management screens
cannot be specified while a job
is being performed. After the
job is finished, touch [Admin.
Management] again, and then
specify the desired setting.
3
Use the 10-Key Pad to type in the
8-digit administrator code, and
then touch [Enter].
Note
If the administrator code is in-
correctly entered, the message
"Incorrect administrator code.
Try again." appears accompa-
nied by a beeping sound. Fol-
low the instructions in the
message that appears and type in the correct administrator code.
If the "Access Lock" function is set to "ON", incorrectly typing the administra-
tor code is counted as an incorrect attempt to access the machine. After
three incorrect attempts to access the machine, even if the correct adminis-
trator code is entered on a later attempt, an error message appears and ac-
cess to the Administrator Management screen is denied. To allow access to
the Administrator Management screen, turn the machine off, then on again,
and then type in the correct administrator code.
Keep the administrator code in a safe place hidden from the general user.
6-2
6.1 Administrator Management Screens
Di2510/Di3010/Di3510