Konica Minolta BIZHUB 360 User Manual page 83

Before Making Copies
No. Name
9 [Reset] key
10 Sub power switch
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 [C] (Clear) key
17 Keypad
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 [Help] key
22 [Accessibility] key
23 Contrast dial
24 [Enlarge Display] key
Reminder
Do not press the touch panel with an object with a sharp end or apply
extreme pressure to it, otherwise it may be scratched or damage
bizhub 500/420/360 (Phase 3)
Description
Resets all the settings specified using the control panel
and the touch panel. (Stored settings are not reset by this
key.)
Turns on/off the copying and scanning functions.Turning
it off will terminate all the functions other than the print
and fax functions, and enter the sleep mode.
Press to abort the ongoing operation; delete the stored
memory.
Press to start operations such as copying. When this ma-
chine is ready to begin copying, the indicator on [Start]
key lights up in green. If the indicator on key lights up in
orange, copying cannot be started.
Lights up in green when the main power is turned on.
Blinks in green while a print job is being received. Lights
up in green when a print job is queued for printing or when
printing is in progress.
Press to print a single sample copy to be checked before
printing a large number of copies.
Press to change a value (such as the number of copies
and the zoom ratio) entered from the keypad.
Press to enter values for various settings, including the
number of copies and the zoom ratio.
Press to display the Mode Check Screen to view the cur-
rent copy settings.
Press to display the Utility Screen or the sales counter.
Press to register the desired copy settings as a program
or to recall a registered copy program.
Press to display the Help Screen that explains how to
copy or use other functions.
Press to change the control panel and touch panel set-
tings.
Use to adjust the contrast of the touch panel.
Press to switch between the Enlarge Display mode and
the standard display mode.
3
3-23