Konica Minolta BIZHUB 360 User Manual page 458

8
3
Touch the four check keys [+] to check the buzzer tone.
When a check point is touched correctly, the Start LED on the control
panel will light up in green.
Is there a specific order to touch the check keys?
?
% No. Touch them in any order.
Why can no buzzer tone be heard?
?
No sound can be heard if the Sound Setting has been set to OFF.
% Set the function to ON. For details, see "Enabling Key Tones
(Sound Setting)" on page 8-36.
? Do you want to reset the adjustment?
% Press [C] (Clear) on the control panel, then touch the four check
keys [+] again.
Do you want to cancel the adjustment?
?
% Press [Stop] on the control panel. The Basic Screen will be
restored.
4
Press [Start] on the control panel.
The position of the touch sensor will be adjusted, and the Accessibility
Screen will be restored.
8-42
Advanced Information
bizhub 500/420/360 (Phase 3)