Konica Minolta BIZHUB 360 User Manual page 411

Finishing/Folding
8
Specify any necessary copy settings.
– Auto Paper Select may be released automatically depending on the
setting you made.
When using Sort or Group in alternating crisscross pattern, make
sure that other copy conditions do not conflict with Auto Paper
Select.
9
Press [Start].
The scan/print job will start.
Note
To cancel changes to the settings, touch [Cancel] on the Finishing
Screen.
To cancel all settings, press [Reset].
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420/360 (Phase 3)
7
7-31