To Give Priority To The Copy Setting Specified First - Konica Minolta BIZHUB 360 User Manual

3

To give priority to the copy setting specified first

The Booklet setting is given higher priority than the 2 Position Staple setting.
As an example, the procedure for selecting the 2 Position Staple setting after
setting the Booklet function is described below.
1
Set the Booklet function.
2
Select the 2 Position Staple setting.
The message "This mode is not available with Booklet" appears and
the 2 Position Staple setting cannot be selected.
To enable the 2 Position Staple setting instead, cancel the Booklet
function.
3-68
Before Making Copies
bizhub 500/420/360 (Phase 3)