Konica Minolta BIZHUB 360 User Manual page 683

Utility <Administrator Setting>
The Password for Non-Business Hours Screen will be displayed.
3
Select whether or not to allow the use of the machine during non-
business hours.
– Touch [ON] or [OFF] in the left side area of the screen to highlight it.
4
Specify a password, if desired.
– Touch [Password] in the right side area of the screen.
The Password Creation Screen will be displayed.
– Use the control panel keypad to enter the desired password.
Up to eight digits can be entered.
5
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
6
If further changes are required, touch the desired key.
bizhub 500/420/360 (Phase 3)
16
16-61