Konica Minolta BIZHUB 360 User Manual page 255

Application Functions
8
Select the tray loaded with cover paper in step 3.
9
Touch [OK] to complete the setting on each screen, then return to the
Application Screen.
– Touch [Cancel] on the Cover Mode Screen to cancel the setting
change.
10
Select additional copy conditions, as desired.
11
Press [Start] on the control panel.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420/360 (Phase 3)
6
6-13