Konica Minolta BIZHUB 360 User Manual page 224

5
– If changing the direction of page arrangement to start from the right
side, touch [Margin] to select [Right], then touch [OK].
Reminder
Load copy paper of the same size as the original, if not loaded in any tray.
Note
To release Combine Pages, touch the highlighted key again to deselect
it, or press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
!
Detail
If change the direction of paper arrangement to start from the right side,
specify the margin of copy image. For details, see "Creating Margin of
Copy Image (Page Margin)" on page 6-76
5-8
Combine Originals/ Original Image Type
bizhub 500/420/360 (Phase 3)