Konica Minolta BIZHUB 360 User Manual page 317

Application Functions
4
Touch [Neg./Pos. Reverse] on the Application Screen to highlight it.
5
Select additional copy conditions, as desired.
6
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420/360 (Phase 3)
6
6-75