Konica Minolta BIZHUB 360 User Manual page 64

3
No. Name
1 Left partition glass
2 Document scales
3 Document pad
4 Original glass
5 Control panel
6 Machine Status indicator
7 Adjustable paper guides
8 Paper tray
9 Original output tray
10 Document stopper
11 Sub power switch
12 Automatic duplex unit door
release lever
13 Automatic duplex unit door
14 Release lever for the right-
side door of the main unit
15 Release lever for the vertical
conveyance door of the main
unit
16 Bypass tray entrance door le-
ver
17 Bypass tray
18 Tray extension
19 Adjustable document guides
20 Tray 1
21 Tray 2
22 Paper-empty indicator
3-4
Description
Scans the original positioned in the ADF.
Used to align the document.
Presses down on the document positioned on the original
glass.
Scans the image of the loaded document.
Use to specify the various settings and perform opera-
tions such as starting copying. Refer to page 3-22 for de-
tails.
Indicates machine status by combining the color (green
or red) and the state (steady on or blinking).
Used as guides with which to align the original positioned.
Place the original face up.
Feeds out scanned originals.
Set in a standing position to prevent large-sized originals
falling off the original output tray.
Turns on/off the copying and scanning functions.Turning
it off will terminate all the functions other than printing,
and receiving and outputting facsimile data, and then en-
ter the sleep mode.
Opens the automatic duplex unit door in case of paper
misfeeds within the automatic duplex unit.
Opened when clearing paper misfeeds within the auto-
matic duplex unit.
Pulled out to open the right-side door of the main unit.
Slided to the right to open the vertical conveyance door
when clearing paper misfeeds.
Held to slide to the front of the bypass tray entrance door
when clearing paper misfeeds.
Opened and used to print on the type of paper that is not
or cannot be set in the other trays, including thick paper,
overhead projector transparencies, envelopes or label
sheets.
Opened when large-sized paper is to be loaded into the
bypass tray.
Used as guides with which to align the paper.
A maximum of 500 sheets of A3 to A5 plain paper (80
2
g/m ) can be loaded
A maximum of 500 sheets of A3 to A5 plain paper (80
2
g/m ) can be loaded.
Indicates the remaining number of sheets of paper in the
paper tray. As the amount of paper in the paper tray de-
creases, the area that appears in red increases.
bizhub 500/420/360 (Phase 3)
Before Making Copies