Table of Contents
Advertisement
12
Maintenance
Maintenance
Repairs and/or upgrades are not to be performed on this product. These
services are to be performed only by an authorized service center.
"Customer Support" on page 13-1
Cleaning the Scanner's Window
Reading performance may degrade if the scanner's window is not clean. If the
window is visibly dirty, or if the scanner isn't operating well, clean the window with
a soft cloth or lens tissue dampened with water (or a mild detergent-water
solution or alcohol). If a detergent solution is used, rinse with a clean lens tissue
dampened with water only.
The base and scanner's housing may also be cleaned the same way.
Do not submerge the imager in water. The scanner's
Do not use abrasive wipes or tissues on the imager's
window – abrasive wipes may scratch the window. Never
use solvents (e.g., alcohol or acetone) on the housing or
window – solvents may damage the finish or the window.
Inspecting Cords and Connectors
Inspect the base's interface cable and connector for wear or other signs of
damage. A badly worn cable or damaged connector may interfere with scanner
operation. Contact your Hand Held Products distributor for information about
cable replacement. Cable replacement instructions are on
IMAGETEAM™ 2020/5620 System Manual
for further information.
!
Caution:
housing is not watertight.
See
page
12-2.
12 - 1
Advertisement
Table of Contents
