Code 128 Function Code Transmit; Telepen; Telepen Output - Hand Held Products IMAGETEAM 5620 System Manual

Code 128 Function Code Transmit

By default, Code 128 function codes are not transmitted with Code 128 bar code
data. However, if you wish to transmit Code 128 function codes with the bar code
data, scan the Function Codes On bar code, below.
* Function Codes Off
Function Codes On

Telepen

<Default All Telepen Settings>
Telepen
On
* Off

Telepen Output

Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2). Default = AIM Telepen Output.
* AIM Telepen Output
Original Telepen Output
IMAGETEAM™ 2020/5620 System Manual 6 - 17