Connecting The Cisco Spa 500S Attendant Console To The Ip Phone - Cisco 501G User Manual

Using the Cisco SPA 500S Attendant Console

Connecting the Cisco SPA 500S Attendant Console to the IP Phone

Connecting the Cisco SPA 500S Attendant Console to the IP
Phone
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500
Series IP Phones, providing 32 three-color (red, green, and orange) programmable
LEDS, with support for Broadsoft Busy Lamp Field and Asterisk Line Monitoring.
The Cisco SPA 500S attaches to the IP phone with the attachment arm provided. It
obtains power directly from the IP phone and does not require a separate power
supply. Two Cisco SPA 500S units can be attached to a single IP phone to monitor
a total of 64 separate lines.
To connect the Cisco SPA 500S Attendant Console to the IP phone, you need the
following:
• Cisco SPA 500S Attendant Console
• Attachment Arm
• Two (2) Attachment Arm Screws
• Auxiliary Interconnect Cable
• Stand
6
78