Deactivating Do Not Disturb; Turning Call Waiting On And Off - Cisco 501G User Manual

Using Basic Phone Functions

Turning Call Waiting On and Off

STEP 1
STEP 2
STEP 3
STEP 4
Turning Call Waiting On and Off
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Using the Setup button:
You can also access Do Not Disturb by performing the following steps:
Press the S S etup button and select P P references > D D o Not Disturb.
Press the e e dit softkey.
Press y y /n to choose y y , then press o o k.
Press s s ave.
Using the star code:
Enter *78 to activate Do Not Disturb.

Deactivating Do Not Disturb

Using the -dnd softkey:
To deactivate Do Not Disturb, press the - - dnd softkey.
Using the Setup button:
You can also deactivate Do Not Disturb by pressing the S S etup button and
selecting P P references > D D o Not Disturb.
Using the star code:
Enter *79 to deactivate Do Not Disturb.
Call waiting alerts you when you are on a call by ringing your phone and displaying
a status message that another call is ringing. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
You can also turn call waiting on and off from your PC using the IP Phone Web
Interface. See the "Configuring Call Waiting" section on page
3
70.
39