Setting Or Changing A Phone Password; Accessing Voicemail - Cisco 501G User Manual

Using Basic Phone Functions

Setting or Changing a Phone Password

Setting or Changing a Phone Password
STEP 1
STEP 2
STEP 3
STEP 4

Accessing Voicemail

STEP 1
STEP 2
STEP 3
TIP
STEP 4
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
You can set or change the password for your phone to prevent unauthorized use.
To set a password for your phone:
Press the S S etup button.
Select S S et Password.
Enter a numeric password. Enter the same password twice.
Press s s ave.
To access voicemail, press the M M essages button on your phone. Your system
administrator should configure your phone with the correct voicemail number so
that pressing the M M essages button automatically dials your voicemail system.
If you need to change the number for your voicemail (for example, if your phone is
not part of a Cisco SPA 9000 Voice System and you have external voicemail),
perform the following steps:
Press the S S etup button.
Scroll to V V oice Mail and press s s elect.
Enter the number to dial for voicemail. For a Cisco SPA 9000 Voice System, this is
normally "vmm." For an external system, enter the phone number, including any
digits you must dial to reach an outside line.
To clear the field of a previous entry, press c c lear. To enter letters, press the R R ight
navigation button to scroll, then press the a a lpha softkey.
Press s s ave.
3
48