KitchenAid KGCU462VSS00 Installation Instructions Manual page 6

Cabinet Requirements
A. See chart.
B. See chart.
C. See chart.
D. See chart.
E. See chart.
F. 18" (45.7 cm) min. clearance upper
cabinet to countertop
G. ¾" (1.9 cm) back of cabinet cutout to gas
opening cutout
H. 6z_ '' (16.1 cm) gas opening cutout depth
I. 127/2 '' (31.7 cm) gas opening cutout width
J. 22 ¼" (56.5 cm) cabinet cutout depth
K. 2" (5.1 cm) cabinet side to gas cutout
L. 6" (15.2 cm) min. distance on both sides of the
cooktop to the side wall or other combustible
material above cooking surface
M. 24" (61.0 cm) cabinet depth
N. 7_" (18.4 cm) cabinet depth to countertop
O. Notch to be equal on both sides
P. 13" (33.0 cm) upper cabinet depth
Size Model A** B* C D E
Cooktop Cutout Cooktop to Optional Cabinet and Countertop Only
to Back Wall Cabinet Backguard and Countertop
Upper Cabinet
Opening
30" (76.2 cm) KGCU407 1%" (4.4 cm)** 30" (76.2 cm) 30" (76.2 cm) 29W' (74.3 cm) 30" (76.2 cm) or
297/8 '' (75.9 cm) for
zero clearance
36" (91.4 cm) KGCU462 11/2 '' (3.8 cm)** 42" (106.7 cm) 36" (91.4 cm)
KGCU463 1%" (4.4 cm)
KGCU467 1%" (4.4 cm)
48" (121.9 cm)
351¼ '' (89.5 cm) 36" (91.4 cm) or
357/8 '' (91.1 cm) for
zero clearance
KGCU482 11/2 '' (3.8 cm)** 42" (106.7 cm) 48" (121.9 cm) 471¼ '' (120.0 cm) 48" (121.9 cm) or
KGCU483 1%" (4.4 cm)** 477/8 '' (121.6 cm) for
KGCU484 11/2"(3.8 cm)** zero clearance
*NOTES: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than
0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop
surface.
**NOTE: If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A
+ 6" (15.2 cm) is required for 48" (121.9 cm) cooktops and cooktops with a grill.
6