ACME LED-245 II User Manual

User Manual
LED-245 II
Please read this user manual carefully and follow the instructions to
avoid danger or damage to the unit due to mishandling.
Thank you for purchasing our LED effect lighting, we guarantee your
satisfaction in having acquired this lighting product.
A. SAFETY INTRODUCTIONS
•
Please keep this User Manual for future consultation. If you sell the unit
to another user, be sure that they also receive this instruction booklet.
•
Unpack and check carefully there is no transportation damage before
using the unit.
•
Before operating, ensure that the voltage and frequency of power
supply match the power requirements of the unit.
•
It's important to ground the yellow/green conductor to earth in order to
avoid electric shock.
•
The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
•
Disconnect mains power before replacement or servicing.
•
Replace only with the same type.
•
Make sure there are not flammable materials close to the unit while
operating, as it is fire hazard.
•
Use safety cable when fixes this unit.
•
In the event of serious operating problem, stop using the unit
immediately. Never try to repair the unit by yourself. Repair carried out
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance center and always use the
same type spare parts.
•
Do not touch any wire during operation as high voltage might be
causing electric shock.
1-