HP VECTRA VE User Manual page 37

3 Slide the drive into the rear drive shelf, supporting the drive with
your hand.
4 Align the drive with the holes in the rear drive shelf. Then secure the
drive with the screws provided with it.
Step 3: Slide drive into rear shelf.
5 Connect the power cable and the data cable to the rear of the drive.
The connectors are shaped to go in one way only.
6 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
7 Verify the new configuration by checking the HP Summary Screen.
Refer to the "The HP Summary Screen", on page 42.
2 How to Install Accessories In Your PC
Installing Mass Storage Devices
Step 4: Align and secure the drive.
Data cable
Power cable
2
English 25