Playing A Cd - CyberHome MP016-A User's Operation Manual

Playing a CD

Playing a CD
1. Turn on the TV and the player . Load the Audio CD
2. When using as amplifier, turn on the amplifier and select the appropriate position so that you
can listen to the sound from this player. The TV does not need to be on when the setup is using
the amplifier and speakers and/or amplifier.
3. Press and place the disk on the disk tray.
4. Press /
The disk tray and front panel close and the player plays all the tracks once (Continuous Play).
Adjust the volume on the amplifier, or when using the TV for audio output, volume adjustment
can also be done using the DVD Remote Control buttons.
To Stop Playback
Press <
Locating a Track or Desired Location
FR
Next
Number buttons
GOTO search mode
26
With the playback
side facing down
Figure 18 Placement of DVD Disk in Disk Tray
ENTER/PLAY
3
1 2
4 5 6
7 8 9
0 C
+10
GOTO SHUFFLE
ZOOM
PROGRAM REPEAT
1/ALL A-B
Figure 19 CD Navigation Commands
( * ) "Playing disks in various modes"
FF
Enter/Play
Previous
STOP
Stop
PAUSE
Pause
SLOW
DISPLAY
Display current location
Clear (selection during Shuffle
P/N
& Program mode)*
SETUP
Repeat function
DVD Player User's Manual