Table of Contents
Advertisement
INSTALLATION
A. Use the supplied L Wrench to remove the four fixing
screws from the dome cover.
B. Align the camera unit with the surface of the ceiling .
Draw marks on the ceiling in the places where the screw
holes will be drilled. Drill the four holes.
C. Cut a small hole in the ceiling for the cables.
D. Pass the power cable and video cable from the camera
unit through the cable hole in the ceiling.
E. Align the four screw holes in the camera unit with the
screw holes on the ceiling, and then secure the camera in
place by tightening the four screws through the washers.
F. Carry out the settings and adjustments for the camera.
G. Secure the dome cover by tightening the screws.
Advertisement
Table of Contents
