Getting to Know Your Copier
2.5
Turning ON and OFF and Initial Mode
Turning ON and OFF
• Turning copier ON
Press the power switch to the
position.
• Turning copier OFF
Press the power switch to the
(OFF) position.
When Copier is Turned ON
When the power switch is turned ON, the message "Warming-up. Pre-
program a job." appears on the touch panel and the copier now enables
its auto copy start function.
Auto Copy Start function, see page 2-14.
Pressing the Start key at this point does not start a copy cycle. You're
going to have to wait for approx. 9 minutes (at an ambient temperature of
20°C/68°F).
Initial Mode
When the power switch is turned ON, the basic screen appears on the
touch panel. The settings on this screen are called the initial mode. The
basic screen serves as the reference for all panel settings to be made
later.
No. of copies selected: 1
Zoom: ×1.000
Paper: Auto Paper
Density: Manual Expo.
Input
Output: 1
Finishing: Non-Sort
Useful Tip
The initial mode can be changed. For details, see page 5-1.
CF9001
(ON)
1
2
2-11