Table of Contents
Advertisement
3
è
Do not look directly at the original glass surface as a strong beam of
light is emitted.
è
Not positioning the open book properly will result in copies with pages
in incorrect order.
è
Start copying with the higher-numbered pair.
When Copier is Equipped with a Duplexing Document Feeder
Make sure of the correct placement of the original in any of the following
cases if the copier is equipped with a duplexing document feeder.
è
Making copies in the Photo mode.
è
Making A3 Wide copies.
1
Place the original, by aligning the
rear edge with the length scale and
the left edge with the M (Photo)
mark.
2
Gently lower the duplexing document feeder or the original cover.
3
Make settings in the Photo Mode, see page 3-42.
Instructions for Original Placement
Be sure to raise the duplexing
document feeder 15° or more before
placing the original. If the duplexing
document feeder is raised to an angle
less than 15°, the copier may fail to
select the correct copy paper size or
zoom ratio.
NOTES
è
Do not place an original weighing more than 2 kg on the glass.
è
When placing an open book, do not press the book hard on the glass,
as the glass could crack.
3-6
Making Copies
PHOTO Mark
15°
CF9001
Advertisement
Table of Contents
