Initial Mode And Panel Resetting - Minolta EP3050 Operator's Manual

24
5. Turning ON and OFF, and Resetting the Copier

Initial Mode and Panel Resetting

Initial Mode
When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on
this screen are called the initial mode.
Note: The Basic screen serves as the reference for all panel settings to be later made.
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure
Useful Tip
The initial mode can be changed. For details, see User's Choice.
Panel Resetting
The Panel Reset Key resets all control panel settings to default settings including the number of
copies selected and zoom ratio.
Useful Tip
The Panel Reset Key enables you to cancel all previous settings efficiently. To avoid miscopy, try
to press this key before making any setting for your own job.
Auto Reset Function
If no key on the control panel is pressed within about 60 seconds after a copy cycle has been
completed or copying settings made, the Auto Reset function is activated to return the copier to the
default settings.
Useful Tip
The Auto Reset function can be enabled or disabled by the User's Choice. For more details, see
User's Choice. p. 123
Orig. Copy
Basics
1
Auto Paper
Zoom Paper
1134P488CA
1134P341DA
No. of copies selected: 1
: 1.000
Zoom
: Auto Paper
Paper
: Auto Expo.
Exposure
p. 122
Note: If Duplexing Document Feeder AFR-9 is
used, the original present on the Original
Glass will be ejected out of the unit.